Tsamaiso e hole
Tlhokomelo ea maemo
Ts'ebetso le tlhokomelo e hole
Taolo ea Tšireletseho
APQ Embedded Industrial PC E5 Series ke komporo ea liindasteri e sebetsang hantle haholo e etselitsoeng ka ho khetheha li-automation tsa indasteri le lits'ebetso tsa komporo ea moeli. E sebelisa Intel® Celeron® J1900 processor ea matla a tlase haholo, e fanang ka tekanyo e ntle ea matla a matla le moralo o tlase oa mocheso, e netefatsa ts'ebetso e tsitsitseng libakeng tse fapaneng tsa indasteri. Letoto lena le kopanya likarete tse peli tsa marang-rang tsa Intel® Gigabit, tse fanang ka likhokahano tsa marang-rang tse potlakileng le tse tsitsitseng ho finyella litlhoko tsa phetisetso ea data le puisano. E na le li-interfaces tse peli tsa onboard, e ts'ehetsa liphetho tse fapaneng tsa ponts'o, e etsa hore ho be bonolo ho hlahisa data ea nako ea nnete le litšoantšo tsa ho beha leihlo ho li-monitor tse fapaneng. E ts'ehetsa phepelo ea motlakase e pharalletseng ea 12 ~ 28V DC, e ikamahanyang le maemo a fapaneng a matla le ho netefatsa ts'ebetso e tsitsitseng tlasa maemo a fapaneng a ts'ebetso. Ho feta moo, e ts'ehetsa katoloso ea waelese ea WiFi / 4G, e nolofalletsa likhokahano le taolo e se nang mohala, e ntse e holisa maemo a ts'ebeliso ea eona.
Moralo oa 'mele o kopaneng o etsa hore APQ Embedded Industrial PC E5 Series e loketse maemo a kenelletseng. Ebang ke lisebelisoa tsa boiketsetso kapa libakeng tse koaletsoeng, E5 Series e fana ka tšehetso e tsitsitseng le e sebetsang ea komporo.
Mohlala | E5 | |
Sistimi ea processor | CPU | Intel®Celeron®processor J1900, FCBGA1170 |
TDP | 10W | |
Chipset | SOC | |
BIOS | AMI UEFI BIOS | |
Mohopolo | Soketeng | DDR3L-1333 MHz (Ka sekepeng) |
Boholo ba Bokhoni | 4GB | |
Litšoantšo | Molaoli | Intel®Litšoantšo tsa HD |
Ethernet | Molaoli | 2 * Intel®i210-AT (10/100/1000 Mbps, RJ45) |
Polokelo | SATA | 1 * SATA2.0 Connector (2.5-inch hard disk e nang le 15 + 7pin) |
mSATA | 1 * sekotjana sa mSATA | |
Katoloso Slots | aDoor | 1 * ADoor Katoloso Module |
PCIe e nyane | 1 * Mini PCIe Slot (PCIe2.0 x1 + USB2.0, e nang le 1 * Nano SIM Card) | |
Pele I/O | USB | 2 * USB3.0 (Mofuta-A) 1 * USB2.0 (Mofuta-A) |
Ethernet | 2 * RJ45 | |
Pontšo | 1 * VGA: qeto e kholo ho fihla ho 1920 * 1200 @ 60Hz | |
Seriale | 2 * RS232/485 (COM1/2, DB9/M) | |
Matla | 1 * Sehokelo sa Motlakase (12~28V) | |
Ka morao I/O | USB | 1 * USB3.0 (Mofuta-A) 1 * USB2.0 (Mofuta-A) |
SIM | 1 * Sekotjana sa SIM Card | |
Konopo | 1 * Konopo ea Matla + Matla a LED | |
Audio | 1 * 3.5mm Jack-out Jack 1 * 3.5mm MIC Jack | |
Pontšo | 1 * HDMI: resolution e phahameng ho fihla ho 1920 * 1200 @ 60Hz | |
Ka hare I/O | Phanele e ka pele | 1 * TFront Panel (3 * USB2.0 + Front Panel, sephaphatha) 1 * Phanele e ka pele (sephaphatha) |
MOTSAMAI | 1 * SYS FAN (sephaphatha) | |
Seriale | 2 * COM (JCOM3/4, sephaphatha) | |
USB | 2 * USB2.0 (sephaphatha) 1 * USB2.0 (sephaphatha) | |
Pontšo | 1 * LVDS (sephaphatha) | |
Audio | 1 * Molumo o ka pele (Mola-Out + MIC, hlooho) 1 * Sebui (2-W (kanale ka 'ngoe)/8-Ω Meroalo, sephaphatha) | |
GPIO | 1 * 8bits DIO (4xDI le 4xDO, hlooho) | |
Phepelo ea motlakase | Mofuta | DC |
Matla a ho Kena ka Matla | 12-28VDC | |
Sehokedi | 1 * DC5525 e nang le senotlolo | |
Battery ea RTC | CR2032 Coin Cell | |
Tšehetso ea OS | Windows | Windows 7/8.1/10 |
Linux | Linux | |
Mohlokomedi | Sephetho | Reset ea sistimi |
Karohano | Programmable 1 ~ 255 sec | |
Mechini | Boitsebiso bo Koaheletsoeng | Radiator: Aluminium alloy, Lebokose: motsoako oa aluminium |
Litekanyo | 235mm(L) * 124.5mm(W) * 35mm(H) | |
Boima ba 'mele | Nete: 0.9Kg Kakaretso: 1.9Kg (Kenyelletsa sephutheloana) | |
Ho phahamisa | VESA, Lebota le kentsoe, ho beoa deskeng | |
Tikoloho | Sistimi ea ho futhumatsa mocheso | Phallo ea mocheso e sa fetoheng |
Mocheso oa ho sebetsa | -20 ~ 60 ℃ | |
Mocheso oa polokelo | -40 ~ 80 ℃ | |
Mongobo o Batlang | 5 ho isa ho 95% RH (e sa fokotseheng) | |
Vibration Nakong ea Ts'ebetso | Ka SSD: IEC 60068-2-64 (3Grms@5~500Hz, ka tšohanyetso, 1hr/axis) | |
Ho tšoha Nakong ea Ts'ebetso | Ka SSD: IEC 60068-2-27 (30G, halofo ea sine, 11ms) | |
Setifikeiti | CCC, CE/FCC, RoHS |
E sebetsa hantle, e bolokehile ebile e ka tšeptjoa. Thepa ea rona e tiisa tharollo e nepahetseng bakeng sa tlhokahalo efe kapa efe. Rua molemo ho tsoa ho boitsebelo ba indasteri ea rona mme o hlahise boleng bo eketsehileng - letsatsi le letsatsi.
Tobetsa Bakeng sa Lipatlisiso