Tsamaiso e hole
Tlhokomelo ea maemo
Ts'ebetso le tlhokomelo e hole
Taolo ea Tšireletseho
Letoto la APQ resistive touchscreen touchscreen in-one PC PGxxxRF-E6 sethaleng sa 11th-U se kopanya theknoloji e tsoetseng pele le moralo o mocha, o e etsa khetho e nepahetseng bakeng sa litlhoko tsa hau tsa boiketsetso tsa indasteri. PC ena ea indasteri e na le moralo o hananang le sekirini sa touchscreen, se ts'ehetsa likhetho tse tloaelehileng tsa 17/19 inch tse ka amohelang lipontšo tsa lisekoere le sephara se sephara, tse fihlelang litlhoko tse fapaneng tsa bareki. Phanele ea eona e ka pele e lumellana le maemo a IP65, e fana ka ts'ebetso e ntle ea ho se kenelle metsi le lerōle e loketseng maemo a thata a indasteri. E tsamaisoa ke Intel® 11th-U letoto la li-platform tsa CPU, e fana ka ts'ebetso e matla le e tšepahalang. Ka likarete tsa marang-rang tsa Intel® Gigabit tse kopantsoeng tse peli, tšehetso bakeng sa polokelo ea li-hard drive tse peli, le moralo oa ho hula ka lisenthimithara tse 2.5, e thusa ho lokisoa habonolo le ho ntlafatsa. Ntle le moo, sesebelisoa se ts'ehetsa katoloso ea mojule oa APQ aDoor le katoloso ea waelese ea WiFi / 4G, ho hlokomela litlhoko tsa nts'etsopele e potlakileng ea Marang-rang a Kajeno a Liindasteri. Ho feta moo, moralo oa eona o se nang fene le sink ea mocheso e ka tlosoang ka katleho e fokotsa khatello ea mocheso le lerata, ho netefatsa ts'ebetso e tsitsitseng. Likhetho tsa ho kenya rack-mount / VESA tsa sesebelisoa li fana ka ts'ebetso e bonolo ho latela litlhoko tsa 'nete, ha motlakase oa eona oa 12 ~ 28V DC o loketse litlhophiso tse fapaneng tsa indasteri.
Ka bokhutšoanyane, letoto la APQ resistive touchscreen industry all-in-one PC PGxxxRF-E6 sethaleng sa 11th-U ke sesebelisoa se matla, se tsitsitseng le se ka tšeptjoang sa lisebelisoa tsa liindasteri, e leng se etsang hore e be khetho e nepahetseng tšimong ea boiketsetso ba indasteri.
Mohlala | PG170RF-E6 | PG190RF-E6 | |
LCD | Boholo ba Pontšo | 17.0" | 19.0" |
Mofuta oa Pontšo | SXGA TFT-LCD | SXGA TFT-LCD | |
Qeto | 1280 x 1024 | 1280 x 1024 | |
Leseli | 250 cd/m2 | 250 cd/m2 | |
Aspect ratio | 5:4 | 5:4 | |
Viewing Angle | 85/85/80/80° | 89/89/89/89° | |
Max. Mmala | 16.7M | 16.7M | |
Backlight Lifetime | 30,000 hr | 30,000 hr | |
Phapang karo-karolelano | 1000:1 | 1000:1 | |
Skrine se thetsoang | Mofuta oa Thepa | 5-Wire Resistive Touch | |
Molaoli | Letšoao la USB | ||
Kenyeletso | Monoana/ Pene ea ho thetsa | ||
Phetiso ea Leseli | ≥78% | ||
Ho thatafala | ≥3H | ||
Tobetsa bophelo bohle | 100gf, makhetlo a limilione tse 10 | ||
Stroke bophelo bohle | 100gf, makhetlo a limilione tse 1 | ||
Nako ea ho arabela | ≤15ms | ||
Sistimi ea processor | CPU | Intel® 11thGeneration Core™ i3/i5/i7 Mobile -U CPU | |
Chipset | SOC | ||
BIOS | AMI EFI BIOS | ||
Mohopolo | Soketeng | 2 * DDR4-3200 MHz SO-DIMM Slot | |
Boholo ba Bokhoni | 64GB | ||
Litšoantšo | Molaoli | Intel® UHD Graphics / Intel®Iris®Xe Graphics (e ipapisitse le mofuta oa CPU) | |
Ethernet | Molaoli | 1 * Intel®i210AT (10/100/1000/2500 Mbps, RJ45) | |
Polokelo | SATA | 1 * SATA3.0 Sehokelo | |
M.2 | 1 * M.2 Key-M (SSD, 2280, NVMe+SATA3.0) | ||
Katoloso Slots | aDoor | 2 * aDoor Katoloso Slot | |
ADoor Bese | 1 * ADoor Bese (16*GPIO + 4*PCIe + 1*I2C) | ||
PCIe e nyane | 1 * Mini PCIe Slot (PCIe x1+USB 2.0, e nang le Nano SIM Card) | ||
Pele I/O | USB | 2 * USB3.2 Gen2x1 (Mofuta-A) | |
Ethernet | 2 * RJ45 | ||
Pontšo | 1 * DP: ho fihla ho 4096x2304@60Hz | ||
Seriale | 2 * RS232/485 (COM1/2, DB9/M, taolo ea BIOS) | ||
Fetoha | 1 * AT/ATX Mode Switch (Ho nolofatsa / Thibela matla ka bo eona) | ||
Konopo | 1 * Seta bocha (tšoara 0.2 ho isa ho 1s ho qala bocha, 3s ho hlakola CMOS) | ||
Matla | 1 * Sehokelo sa Motlakase (12~28V) | ||
Ka morao I/O | SIM | 1 * Nano SIM Card Slot (Mojule ea Mini PCIe e fana ka tšehetso e sebetsang) | |
Konopo | 1 * Konopo ea Matla + Matla a LED | ||
Audio | 1 * 3.5mm Audio Jack (LineOut+MIC, CTIA) | ||
Ka hare I/O | Phanele e ka pele | 1 * Panel e ka pele (sephaphatha, 3x2Pin, PHD2.0) | |
MOTSAMAI | 1 * CPU FAN (4x1Pin, MX1.25) | ||
Seriale | 1 * COM3/4 (5x2Pin, PHD2.0) | ||
USB | 4 * USB2.0 (2*5x2Pin, PHD2.0) | ||
LPC | 1 * LPC (8x2Pin, PHD2.0) | ||
Polokelo | 1 * SATA3.0 7Pin Connector | ||
Audio | 1 * Sebui (2-W (kanale)/8-Ω Meroalo, 4x1Pin, PH2.0) | ||
GPIO | 1 * 16bits DIO (8xDI le 8xDO, 10x2 Pin, PHD2.0) | ||
Phepelo ea motlakase | Mofuta | DC | |
Matla a ho Kena ka Matla | 12 ~ 28VDC | ||
Sehokedi | 1 * 2Pin Power Input Connector (P=5.08mm) | ||
Battery ea RTC | CR2032 Coin Cell | ||
Tšehetso ea OS | Windows | Windows 10 | |
Linux | Linux | ||
Mohlokomedi | Sephetho | Reset ea sistimi | |
Karohano | Programmable 1 ~ 255 sec | ||
Mechini | Boitsebiso bo Koaheletsoeng | Radiator / Panel: Aluminium, Lebokose / Sekoahelo: SGCC | |
Ho phahamisa | Rack-mount, VESA, e kentsoeng | ||
Litekanyo | 482.6mm(L) * 354.8mm(W) * 87mm(H) | 482.6mm(L) * 354.8mm(W) * 86mm(H) | |
Boima ba 'mele | Nete: 6.2kg, Kakaretso:9.2kg | Nete: 7.6kg, Kakaretso: 10.9kg | |
Tikoloho | Sistimi ea ho futhumatsa mocheso | Phallo ea mocheso e sa fetoheng | |
Mocheso oa ho sebetsa | 0 ~ 50℃ | 0 ~ 50℃ | |
Mocheso oa polokelo | -20 ~ 60 ℃ | -20 ~ 60 ℃ | |
Mongobo o Batlang | 10 ho isa ho 95% RH (e sa fokotseheng) | ||
Vibration Nakong ea Ts'ebetso | Ka SSD: IEC 60068-2-64 (1Grms@5~500Hz, ka tšohanyetso, 1hr/axis) | ||
Ho tsieleha Nakong ea Ts'ebetso | Ka SSD: IEC 60068-2-27 (15G, halofo ea sine, 11ms) |
E sebetsa hantle, e bolokehile ebile e ka tšeptjoa. Thepa ea rona e tiisa tharollo e nepahetseng bakeng sa tlhokahalo efe kapa efe. Rua molemo ho tsoa ho boitsebelo ba indasteri ea rona mme o hlahise boleng bo eketsehileng - letsatsi le letsatsi.
Tobetsa Bakeng sa Lipatlisiso